I am currently running Dells, a 205 distributor, Pertonix, and MSD 6A without the tach adaptor. I have put over 12K miles with the MSD and my tach still works. I run the tach off of the stock coil terminal. I have also run with a 050 (when I was stuggling with the webers) in this configuration. If you use a 050 or 009 get Pertronix part number 1847A which is the use specific part for 050 and 009 distribtors. If I had known that the adaptor was not required, I would have plunked more money down on the MSD and went for more features.
HTH,
Carlos
|