|
AC Problem
Good mornning everyone. My question is, why my new sanden compressor will not start. I think the problem lies in a relay. I've checked the fuses their good, the evap.motor works, by the way this is on an 82 sc. the front condenser blower works when I by-pass the factory wiring. So turning the switch on in the car gets the evap. blower motor and that's all. Any ideas? One test i did was removed the red wire on the relay inside the evap compartment resulting in no power to the evap. motor,yet the relay was reading 12v at the relay terminal. I'm not giving up but any advice?
|