OK I just re-read the post from JAndrews and am nervous.
I took my engine out in the fall and replaced the chain tensioners. When this happened the cam timing slipped on the right(passenger) side. I did not have the cams out of the engine it must have come lose
Anyways I adjusted the cams by eye. Ensuring that the sprocket was lined up correctly ( the holes) Then I re-adjusted the valves. I am getting ready to put it back in the car. but when I read the post from JAndrews I got nervous!
Am i just being paranoid or should I be doing something before I end up spending big $$$?
Thanks so much
Shawn