[Alan.UK]

Hi,

Do 964 cams have a different bearing size than a 3.0 ltr ? Or do you also need to use the 964 cam carrier?

Will a 3 bearing cam fit in a 4 bearing cam housing ? Or should you use an early cam carrier?

Is a 964 cam chain sprocket different? or should the 3.0 lt set up work?

Also, what would be the best cam for my motor: I have a pair of Andial S grind 4 bearing cams but the bearings are to small for my motor (which is now built up).

Motor is a rebuilt 78 SC motor with new 98mm's 10.3:CR, Crank fire ignition, SSIs, 46 PMOs.. what cams as I need to buy some ASAP, or I do have a pair of early S cams (3 bearing one).

Thanks

Alan.UK