IF I ever get my 2.4 case back from
Competition Engineering, I intend to do
the boat tailing mod myself. Competition
wanted $200 for the job which was reasonable
but with all the other expenses I have
going with this 5R case I decided to
defer to myself.
So let me get this straight,
as I asked the same question a month ago with no response.
Using coarse emery cloth, I can smooth down
the main bearing webs by hand without a lot
of effort due to the soft mag metal? Page 178 in Bruce's book gives a pretty good
image of the result. I intend to give it
a try too.
Bill
2.4S someday...
[This message has been edited by zotman72 (edited 03-22-2001).]
|