|
Leland,
I believe you can get the pistons out with a piece of wooden trim molding scrap ... perhaps 1/2" x 1/2", or thereabouts, whittled in a taper for the last 3/4" ... inserted after you have sprayed a large amount of brake cleaner/degreaser into the bore. A twisting, continuous motion in one direction should be used while tying to 'wedge' the wooden tool into the piston, then continuing with the same dierction, pull back slightly, and slowly with smooth force try to get the piston to come out. I have used this same technique on VW relief pistons, and patience is the key, so don't get in a hurry. Good luck!
------------------
Warren Hall
1973 911S Targa
|