|
Registered
Join Date: Jul 2002
Location: Canberra Australia
Posts: 440
|
Doug,
No mud.......just wanted to see what peoples thoughts where on the degree wheel againt the crossover point. I have not checked the cross over with 0 lash. Will try that again tonight. The degree wheel is about 30 cm in diameter big enought to be acurate. a 1.3 degree difference is acceptable considering the movement of the caams/chain.
If the cross over is a derived number! that makes sence and obviously why a range rather than a definitive number aka open/close degrees.
Thanks for you input
Mark......
|