|
punger (cylinder) in fuel distributor stuck, now what??
So, im trying to get my 2.7s motor running. It had been sitting for a long time without it being ran for any levgth of time. I have fuel pumping to the distributor because when i loosen the 12mm bolt on each of the 6 lines they all squirt gas but in the air box when I reach in and play with the metal lever thing it swings freely with no gas flowing. So I have taken off the 6 12mm bolts and the 3 flat head screws and lifted it up to reveal the cylinder. It is stuck up. Iv tried needle nose pliers to loosen it but it aint happenin.
What now???
Thanks
Nathan
|