|
Registered
Join Date: Aug 2002
Location: Galivants Ferry, SC
Posts: 10,550
|
Don't forget to use all 6 shims provided. The proper number used between pully halves determines desired belt tightness...and the "unused" number of shims are placed between the nut and the outer pulley. This is important so that the nut doesn't bottom out improperly ..and to prevent mechanical damage to the alt shaft and pulleys. Example: if 4 shims are used for the desired belt tighness...use an additional 2 shims under the nut.
- Wil
__________________
Wil Ferch
85 Carrera ( gone, but not forgotten )
|