[machintek]

Hello people, just installed the 5 speed transmission after replacing all the syhchros. And yes, the rear suspension. The car sat for a month while this was done. Now, it will crank but will not start. Ether (starting fluid) into the intake makes it fire up, so ingition is good. Fuel rails have fuel, but pressure unknown. Pump runs a few seconds when the key is turned on. Injectors show 12 V with ignition switch on. Replacing an injector with a small instrument 12 V bulb does not show it to flicker with the engine cranking. What time duration are the pulses? Should I see a flicker of the bulb? Should I rig up a LED or a scope as the sampling rate of most digital meters is too slow.
Any injection trouble shooting tips around in PDF?

Thanks in advance.

George