|
Registered
Join Date: Jun 2004
Location: Rio Rancho, New Mexico
Posts: 1,325
|
GB,
Yes there is a schematic for your car in the tech info center.
After you select the Tech Info tab, you'll see a features box to the left.
The electrical diagrams are located there.
It will take a little looking to get familiar with the layout.
The CDI box in your car has a three pin connector attached to the bottom of the box. If you remove the connector you'll notice the pins are identified as A,B and C.
A is the output and goes to the positive terminal of the coil, pin 15.
B goes to switchable 12 volts. This is the power for the CDI box.
C is the input from the Pertronix via a shielded wire.
The ground is located at the CDI box next to the three pin connector.
The shield goes to the ground.
You may find another wire either at the distributor or near the CDI box that goes to the Tach. It is also connected to the black Pertronix wire.
Enjoy,
__________________
DOUG
'76 911S 2.7, webers, solex cams, JE pistons, '74 exhaust, 23 & 28 torsion bars, 930 calipers & rotors, Hoosiers on 8's & 9's.
'85 911 Carrera, stock, just painted, Orient Red
|