I'm not sure if you're asking about my lights VaSteve, but they are a pretty simple setup: four incandescent bulbs, 1 red, 3 green, that are activated by the brake master cylinder switch (red) and three magnetic proximity switches mounted strategically around my gas pedal. I ran a 12v bus to all the lights, and switched the grounds at the mag switches. The "On throttle" switch is a normally open (when magnet is near) magnetic switch that closes when the magnet moves away. The "Mid throttle" and WOT switches are normally open until the magnet nears.
__________________
_______________________
Racer Rix Spec911 #5
prc-racing.com
|