[Avery]

The GO POWER water brake is a standard old school unit that is rated to handle up to 600HP motors. You don't need it unless you want to get torque readings. TD is on the right track as far as mounting a 911 motor. Use a old tranny housing to bolt the engine to....just make sure you have enough space so as not to interfear with the flywheel and ring gear. This "adapter" can then be welded to a thick plate and in turn bolt the plate to the stand. I'll shoot some pictures and post them tomorrow so you can get a better look. The front supports that bolt to the engine mount (pulley side) is kinda slick. Better to show detail in pictures. Please note.....My stand was built by GO POWER..I did not design nor build it.