|
believe me... leveling, squaring, getting angles right are the EASY parts of the job. 200ft, 6" spacing, 1 cut per bar, 2 welds per bar minimum, top and bottom rails, setting posts, grinding, priming, painting, etc., etc. hope you have plenty free time.. doubt it cost less for the fence than you would have made during the lost time at work. but look at all the burns, grinder bites, blisters, flashes you'll miss out on if you pay to have it done.
__________________
John
74 911s
They laugh at me because I am different.
I laugh at them because they are all the same.
|