|
Politically Incorrect
Join Date: Aug 2005
Location: Hoover, Alabama
Posts: 1,497
|
I did something similar this past summer. Replaced all the rubber pieces that could be a potential vacuum leak. Big and little air/vapor hoses, AOS o-rings, injector seals/caps, IM gasket, throttle body rebuild kit, all new clamps, venturi delete, BB check valve, etc. While you are in there, you might consider the dipstick tube o-ring, the 730 cap o-ring and, what the heck, the gas cap seal too. BTW our sponsor has the ICV lord mounts for about $4.50 each, I think.
NOTE: if it doesn't start after you put it all together, make sure the reference sensors are plugged in correctly - they can easily be swapped. AMHIK
...and yes they are called lord mounts...
__________________
Edek
'87 924S
'91 535i
|