|
First off double check you tightened all of the hose clamps.
Connect the line on the underside of the manifold and tighten, then connect the line on the front of the intake and tighten. From there just lay the intake manifold back on with the intake gaskets in place and stick a couple of the bolts in and thread a few turns. Remember to put the one 13mm bolt on the side of the intake back on and attach the dipstick. Not as bad as you think
__________________
Jon
1988 Granite Green 911 3.4L
2005 Arctic Silver 996 GT3
Past worth mentioning - 1987 924S, 1987 944, 1988 944T with 5.7L LS1
|