|
Plan on bleeding the brakes
I replaced the bearings, rotors, and calipers on another car I owned so have some idea what is involved. One wheel is off my 914 and I just took a close look. From the caliper there is a short piece of metal brake line that connects to the flexible rubber piece at a bracket off the lower part of the strut. You might be able to pry the metal brake line off the bracket and then hang the caliper up with some wire, but you may kink it or make it leak. You are better off undoing the fitting at the caliper. Then when you have the rotor back on replace the copper gasket and flexible hose.
|