Quote:
Originally posted by WolfeMacleod
I did not find an relays after looking for them, which John Walker and someone from my other shop mentioned...
Since I don't want to go cutting up and rewiring a perfectly good harness, I'll probably just go with the lower watt bulbs. But...how much of a diference in lower light is ther really?
And what would be involved in rewiring with 12 awg wire? Any harness hacking?
Any write-ups on this?
|
When I installed my relays, I disconnected the headlamp wires from the fuse block and attached the coils of my relays to these points. I then ran new 12 ga wires (separately) to the headlamp buckets (I drilled two holes for each side, 1 in the tub and one in the bucket)and I attached my new wires to a decent (Hella) headlamp connector.