|
I am currently in the process of restoring a
73 - 2.0 with the special edition package-
sway bars etc.Replaced the rear springs with
100 lb units, and Bilsteins all around. The
rear bilsteins have adjustable spring plates-
back on the ground now - rear tire camber off
Left side 1/4" in at the top, right side 3/8" -1/2" measured at the rim.Question: what are
costs for the shims,(what thicknesses), according to the Haynes manual, I may need to shim about 3/8 to 1/2 inch, and also what grade bolts should replace the the short stock ones which are now installed?
|