View Single Post
competentone competentone is offline
Registered
 
competentone's Avatar
 
Join Date: Mar 2004
Location: Summerville, SC
Posts: 2,057
Quote:
Originally Posted by Porsche virgin View Post
I started my weed-wacker up this weekend for the first time in months (possibly since last year). It runs fine at idle, but when I get to wide open throttle, it dies. What could be the cause? Too rich, too lean? I know very little about fixing these things.

It runs on a gas/oil mix, and I mixed up the fuel in the tank in case the oil settled over time.

Thanks in advance.
If you haven't gotten it running right yet, I'd say you probably don't need to remove or clean the carburetor. I would dump out the old fuel and put in a fresh mix of fuel.

Then, if you just turn the adjustment screws (probably two of them, one for idle, one for high-speed) counterclockwise about 1 turn, then try to run it for a bit. Readjust the screws back to their original position, and see how it runs. All you're doing by adjusting the screws is allowing any debris to clear through the jets.
Old 08-07-2007, 02:05 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #16 (permalink)