|
Slide it back out and make sure the wires are not hanging up back there and also check that little shroud that covers the back of the alternator is in the proper position. The regulator needs to be on top and and the two curved fins of that little shroud need to be up on the upper left side, angling downward toward the left.
Other than that, you need to just slide the fan shroud in as straight as you can, leading slightly with the bottom first, so the pin engages the little slot it needs to be in. Then push the whole fan forward all the way until it hits the engine case. Once in, it'll only clear the fan pulley by a tiny amount.
|