[munsonbw]

OK, I have looked and searched and I can't seem to find any pics detailing my issue. I just installed the Carrera tensioner upgrade on my 81 ROW and what I have is the tensioner piston is half on and half off of the idler. The tensioner itself is fully seated against the chain housing, and with the cover on looks like the correct amount of the oil feed stub is exposed. The idler is up against the housing too (at the back), but here is about a 3/16" gap between the idler and the tensioner mount. The idlers are from the carrera donor, so I know it isn't a spacer issue. Any ideas? I appears that the idlers just need to "float" a bit towards the rear of the car and all is good. I looked at the diagrams here on Pelican and I see nothing. Any help before I start it up would be great. Oh, in case it matters I did just have the motor apart. Heads and cams stayed together as a unit. Shims were put back per Wayne's book... pretty sure that is correct.

Thanks,
Ben