|
adjust the doors without strikers. make sure the door is flush along the rocker and the quarter panel. if then it won't latch properly when you put the strikers in. re-post or pm me and we'll figure it out. these things have a way of working out once the door is correctly aligned in the opening. if you can, remove the weatherstrip for the door that's in the body channel. I've found it's so stiff and hard it prevents un-obstructed alignment of the door. once the door is aligned and the striker back in you can re-install the weatherstrip. when you take off the striker ( be sure to use the proper tool) you can see how much adjustment you have. often they get frozen in place. just bolt on almost snug and bump it with a rubber mallet.
|