|
from the pics it looks like your door is too high. make sure the top of the door it at the height of the quarter panel. ignore the trim, make sure the metal of the door/quarter lines up. height will affect the door fit due to the curve of the door/quarter. adjust hinges so the door is flush at the rocker. if the rear gap still isn't right , you'll need to bend the door. just put a piece of soft wood between the bottom of the door and the rocker, and lean into the top of the door, HARD! these are immensely strong doors and don't bend easily. my gut feeling is that it's still an adjustment issue. these doors are hard to bend/twist, do you see any deformation of the metal around the hinge? the way it's bent looks like a classic backing into something with the door open. as far as the driver's door window, the cant is adjustable. look for the adjusting bolts in the back of the door.
|