Quote:
Originally Posted by MBEngineering
HI Steve
The 3.2 DME loom is not attached to the main loom????
"One has about 9 wires in it I know this goes to the 3.2DME and DME relay "
You will have wires at the front of the tunnel for the center console switches, wires in the center near the hand brake for the brake light, auto heat control, speedo, seat belt light, poss' switch wires for the cruise control and poss' seat motors/heaters??. depending what year car the loom came out of?
if you let me know what colour wires you have and I will trace them back for you.
regards mike
|
Hi Mike
The main DME loom is seperate from the loom in the centre tunnel and goes out through the rear bulkhead to the engine bay on the left side however there is a group of 9 wires that come from the centre loom to give the DME power from the ignition and starter switch and the tach signal etc goes through this to the front. I have all these rote down in my notes from when I did my 3.2 transplant.
Steve