|
Registered
Join Date: Jun 2005
Location: Birmingham, Alabama
Posts: 286
|
JIm,
The dealer has them and so does Smart Racing. From SRP they are about $1.85 or so each if I remember.
The camber plate is one from Racers Group and looks identical to what I have on my 930 which was built in 1997. There is a spacer that fits between the top of the shock and the bottom of the camber plate bushing which looks some what like your third photo.
When you spin the top nut back on using the impact when it torques up the shock shaft will spin like when you tried it with a wrench. At that point the nut is tight then you can bend the tab up on the locking nut.
Jim
|