[JP Noonan]

I have a Craftsmen all metric tool set. Nice case all the sockets, I also have combo wrenches, and sparkplug socket.

I have a test sparkplug thingy. It is a fake spark plug with a alligator clip on it to test for spark. I also have a injector "noid" it is a %4 tester to see if the injectors are firing. My fuel pump is new, but I have a 15' 12 ga wire that has a 30 amp fuse in-line so I can (if need be) hook the pump directly to the battery.

A mutimeter or at least a test light. Lots of fuses. Electrical tape, duct tape and bail wire, for when the muffler bracket fails.

fix-a-flat.

couple quarts of oil.

extra clutch cable and trunion, if the cable breaks you will most likely loose the trunnion too. A spare accel cable.

A jumper pack, basically a small extra battery.

A spare voltage regulator.

4 C-V joint bolts, and the tool to install them.

a kitchen sink.