Quote:
Originally posted by turtle944
I went to auto zone, found a 90 degrees pair of needle nose plyers, and they had about 3-4" of length after the bend. The handles went up/down and the bend went in far enough to get into the snap ring holes.
$9.50 at autozone
Brian
|
The set pictured above on the left is the only set they had at Autozone. Middle one is from Sears, right set is from Home Depot.
Jeh1995, I can't get to if from the bottom. The holes aren't at the top, nor the bottom. They are towards the front of the car, almost 90 degress from the top/bottom.