Quote:
Originally Posted by Nine9six
Patrick,
What are you basing your doubt upon? Although looks can be deceiving, they "look" correct to me. Have you pulled the old lines out yet, or are you basing your question on how things appear?
In the top photo, the right side of the new hose should connect to the upper most connector in the lower photo. Break free the top connector and attache the new hose to allow brake fluid to fill the hose, and then plug.
Break the lower portion free and connect the free end of the new hose. This should reduce the amount of air you introduc into your system.
Repeat, and bleed brakes.
HTH...
|
Perhaps they are correct after all.
The reason i asked is because i dont want to dismantle the brakes and then find that the new hoses doesn´t fit.
This is my first brakejob on a 911.
I am to lay an order of some parts form a dealer here in sweden, and if they were incorrect i would have exchanged them at the same time.. But it seems like i have the correct hoses after all.!!!
Thanks
//Patrick