|
Andy,
I look forward to hearing your results. With that low AR, that compressor wheel, combined in a high compression engine, should prove to be very interesting.
As far as the polarity notch on the chip.... If you stare down at the top of the board, you will see all the notches on the chips populating the board facing the same direction. Always, always, always.....install the chip in the same orientation as all the other chips that are on the board.
__________________
Dave
'85 930 Factory Special Wishes Flachbau
Werk I Zuffenhausen 3.3l/330BHP Engine with Sonderwunsch Cams, FabSpeed Headers, Kokeln IC, Twin Plugged Electromotive Crankfire, Tial Wastegate(0.8 Bar), K27 Hybrid Turbo, Ruf Twin-tip Muffler, Fikse FM-5's 8&10x17, 8:41 R&P
|