[boxercup]

Originally Posted by smallj

One thing I like about the Techclusion is how easy it is to adjust. If I go out tomorrow and buy a full Akra system for the bike, I will be able to adjust fueling for the new system.

I should start a new thread to talk about adjusting the Techlusion... Maybe it will help someone else or the smart folks here will be able to help me.

Greetings,

When Lenny Pedersen and and I started this project in 2004 we wanted a Plug and Play device that had NO adjustments and required NO Dyno time to make your bike smooth and powerful at all ranges with no flat spots. Economical, powerful and a quick install!

This is what everyone is missing:

Plug and Play in 15 minutes and you have instant power! No adjustments! It is optimized for your bike and modifications <<>> no expensive dyno time.

The Teclusion is a tuning device and that needs a dyno for tuning. You can screwdriver it all day until it is smooth and has the power you want by the seat of your pants. ....Then put it on a dyno and EGA and see how much more tuning you must do and the limited result you will get. ... You might get an Akra system and performance air filters later but the Teclusion is not able to fuel it optimally even after another dyno!

We try all the FI devices on the market in our Dynolab.

We know what works and we have more in the works that works!!

Small J just follow the included instructions from the Techlusion. That is your best bet!