|
It is expensive, it is ugly, it is not easy to work with unless you have a windscreen with nicely contoured curves.
I found that it worked, however.
I put it on the stock R1100S screen and noticed a marked improvement. What I was looking for was less turbulance at +80 mph. It worked very well.
But, it looked like heck. For the 1100S screen you need to cut three pieces - top and two sides. Hey, I've done a little mitering in my day, I know how cut nice 90 degree ends. I never did get it right. It looked like slop.
I took it off.
__________________
Trex
|