|
No answer to your question but where is what I found in the workshop manual about the 60-2.
The manual I have had nothing to say about idle timing...
1. Speed and reference mark sender
The DME is combined with an inductive
sender for engine speed and reference mark
detection. For this purpose, a toothed ring
gear is machined onto the flywheel. This ring
has a total of 60 teeth. Two of these teeth are
replaced by cutouts to generate the reference
mark signal. The reference signal is set at 84.
BTDC.
The air gap between the sender and the
flywheel ring gear is adjustable and must be
1.0:t 0.2 mm.
__________________
Magnus
911 Silver Targa -77, 3.2 -84 with custom ITBs and EFI.
911T Coupe -69, 3.6, G50, "RSR", track day.
924 -79 Rat Rod EFI/Turbo 375whp@1.85bar.
931 -79 under total restoration.
|