[ch944]

Obin, If you can't get the sensors out of the bracket than take the whole assembly out as one. Be very careful not to drop anything in the flywheel housing. There is not much room for hands and fingers back there. You'll need a 6 or 7mm allen wrench and socket. The bolt is at the top end and a pin is at the bottom. This is not a fun job, at least not for me. I'm 6'4" w/ hands like a monster and this job sucked. My frustration level was pegged at 10. My first winter with this problem I did pull them out to clean and I was in your boat, they wouldn't move so I pulled them w the bracket and in the process the allen socket went into the bellhousing. Of course the cleaning didn't work so I found some sensors on ebay and dreaded the job so much I waited till this last winter to change them. If you feel like this is your problem then pullem. Just out of curiosity did you boost or check for spark on a cold start?

ch944