|
Try some different products. On a test spot.
Like Milt said, try on the headlight ring. Of course that won't determine if it will damage your paint so try a another inconspicuous spot on the paint.
There is a product called Krud Kutter that is not that hot and removes latex from plastic without damaging it. I use it on my safety glasses at work every day.
Then there is a product called Goof Off that is hotter and will remove latex, but may damage your paint. It will melt my glasses.
You can try Lacquer thinner but it is very hot and I would use that as a last resort. Test first.
Do not go into the Naptha or Jap dryers, they are way too hot.
There is most likely a solvent that will remove only the overspray.
Start at the bottom.
You will need to rewax afterwards, I am sure all these products will remove wax.
|