[944_science]

I hit it with PB and am letting it soak, is there any tool you found best when removing it? The long needle nose pliers I'm using only allow me to move it slightly back and forth, and its too tight to move by hand. I don't want to destroy the black top of the sensor and end up with the magnet lodged in the bracket/bell housing. I guess time/solvent/force are my best friends at this point.

As for the DME, I will resolder it if my problems don't subside, otherwise I will just leave it alone. A schematic would help, I'm a grad student here at I.U. and we have a pretty good electronics shop that I have access to, if needed those guys can probably help me out too.