|
Bolt on a 50 HP wet shot of nitrous with 2 injectors tapped into throttle plate right after throttle body! Tap the end of the fuel rail for the line going to the solenoid that controls the 5th fuel injector, then use the throttle positioning sensor to get your wide open throttle signal and install your ARM switch to activate the relay you wire it all up to? Its easy and would only take a couple hours to do right, those kits sell for around $450 in Summit! Oh yah get a 3bar fuel pressure regulator and I would install a good used 951 fuel pump in place of yours? You will easily be safe and not have to worry to much about your engine just dont break your transaxle or half shafts?
|