Normally, the horns are mounted on a clamp that secures the J tube to the pipe that comes out of the body. It is through this steel tubing that the wiring goes to the headlight bucket...and gets re-routed to the turn signal buckets and the horns. These are the Porsche clamps that do the securing
And this is where they go
I eliminated the brackets and mounted the restored horns (different thread) to the old front bumper mounts...perfect location
This is what the completed assembly looks like on the drivers side with plenty of clearance for the bumper
Both sides lights in place and wired up...'bout time.
Temp refit of front bumper...seems like I never fitted this prior to painting. The pain of working with fiberglass vs steel...
Next...finish the bumper, and then the centerfill tank neck gets completed.
15x7 wheels should be here tomorrow. I will swap the deep sixes in the rear for the 15x7s and remount the Dunlop 205 50 15s. It will be interesting to see how the rear fitment changes.