Fathers Day clutch bleed
Decided to have some quality time today with my car. First track day is in 3 weeks. I bled the brakes and clutch. Got it off the jacks and clutch went all the way down and would not come back. I did this last year with no problems. Used a pressure bleeder attached to the res. I searched and saw all the posts on bleeding the clutch. I was thinking about hooking the pressure bleeder back up, pumping it up and leaving it with pressure over night till i can do it again. Will this be OK. When I was bleeding the clutch it started to have clean fluid come out of the slave bleed screw so i let it run a few more seconds and then it started pissing a lot of air. It would then run fluid a while andd then all of a sudden a ton of air. There was plenty of fluid in the bleeder and res. Had this happen a bunch of times. Could I just have a bunch of air still in the system.
John
|