View Single Post
Mrmerlin Mrmerlin is offline
Petie3rd
 
Mrmerlin's Avatar
 
Join Date: Jul 2000
Location: Philly PA
Posts: 4,528
Send a message via Yahoo to Mrmerlin
first question i have is, what was the last thing you fixed??
Has the intake ever been removed?
Have you run some techron in the fuel system, or changed out the fuel filter ( blow it out the other way into a catch can to see if its dirty)
Have you ever checked the dampers and FPR for a fuel smell ( pull off the vacuum lines and sniff the end or rub the end on your finger, if you smell fuel its probably leaking) Also get a Myti Vac and see if they hold vacuum
Have you inspected both of the coil leads for corrosion at their ends?
Have you replaced the 2 plastic hose connectors at the MAF boot?
If you replaced the ISV hose, then there is a chance that the hose has split where it bends around to come to the MAF.
Please answer as much as you can
Old 06-06-2009, 05:31 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #12 (permalink)