View Single Post
aj88cab aj88cab is offline
Registered
 
aj88cab's Avatar
 
Join Date: Nov 2003
Location: Marietta, GA (Atlanta)
Posts: 873
Garage
If you are at 26" height at front you might be able to lower it some and maybe gain a little camber. Might be just enough to clear the fender...then again lowering might make it worse. Can't hurt to try and see.

I have rolled fenders and run 7" Fuchs up front. I am at 25", maybe a little less actually. I can get about 0.75 camber on my Carrera, your SC might not be the same.

When I first put the wider wheels on I had a little rubbing even with the rolled fenders. I used a high-tech solution to the issue. I put on a heavy pair of gloves, sat down on the ground, braced my feet against the wheel, and gave the fender a couple of heafty tugs. No more rubbing!
__________________
'88 Carrera Cab 3.2 Diamond Blue Metallic - ERP Polybronze Bushings, ERP Monoballs, SW Chip, Bilstein Sports, 930S Steering Wheel, DAS Rollbar, Sparco 5pt Harness, Hunsaker Sport Seats, Dansk Pre-Muffler, MK 1in-1out Exhaust, Magnecor KV8.5 Wires
'86 944NA, Sunroof Delete, Track Rat, Full Cage
'72 914 1.7 Guards Red / '02 Audi S4 Light Silver Metallic
Old 10-20-2009, 07:16 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #8 (permalink)