Cant just flip it because it connected on a shaft that is flat on one side (can only go on one way).
PMO supplies the TPS in the kit, so I assume it will work ok. We will see soon. Ill make the wires alittle longer when I construct my harness to be sure...
Quote:
Originally Posted by TimT
I haven't used that style tps.. just check that you will be able to get the connector on in that orientation.. if so fine, you can flip it 180 and have the connector up?
Sensor orientation doesn't matter since you have to calibrate the sensor to zero throttle and full throttle in the software..
|
__________________
83 SC Targa -- 3.2SS, GT2-108 Dougherty Cams, 9.5:1 JE Pistons, Supertec Studs, PMO ITB's, MS2 EFI, SSI's, Recurved Dizzy, MSD, Backdated Dansk Sport Stainless 2 in 1 out, Elephant Polybronze, Turbo Tie Rods, Bilstein HD's, Hollow 21-27 TBs, Optima Redtop 34R, Griffiths-ZIMS AC, Seine Shifter, Elephant Racing Oil Cooling.
Last edited by brads911sc; 11-15-2009 at 07:32 PM..
|