View Single Post
Grandad#3 Grandad#3 is offline
Registered
 
Join Date: May 2009
Location: Hawkinsville / Perry, Ga.
Posts: 1,239
If the engine has set up for 6 years pull the plugs and put Kroil into the cylinders and let it set. This will free up the rings. I would do this before I even tried to turn the engine over by hand. More likely than not you will have some oil leaks once the engine runs for a while. Plan on sending the injectors out for a refurbish. Be sure to check the rubber fuel lines at fuel rail for dry rot or just replace them to be safe. Budget in at least $1k and that is on the low side for new stuff needed.

Cheers,
Larry
Old 12-28-2009, 05:35 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #10 (permalink)