|
RETIRED
Join Date: Jul 1999
Location: BOULDER Colorado
Posts: 39,412
|
Replace them all with steel studs, I like Raceware. Don't screw with the bottom end, get a new gasket kit from Pelican and consider a valve and guide job. If you haven't removed the exhaust nuts on the heat exchangers yet...do a search on that BEFORE attempting to remove them.....they can snap in a NY second.
BTDT and it's a beyotch to get a flush snapped stud out.
Last edited by Joe Bob; 12-29-2009 at 06:49 AM..
|