[tadel001]

I have one hose low down on tank (near the base of the filler neck) that i have currently connected to the output on the air boot shown above. The second (black rubber hose) hose connects to the CIS and is shown in the picture above (bottom picture). Then there is that goldish color nipple near the fuel cap (again bottom picture) that has nothing connected to it.

So, I have three outputs that need connecting: (1) crank case oil breather; (2) connection on right side of CIS where the black hose in the bottom picture is about to connect to; and (3) the output on the Air Flow Boot show in the top picture.

Thanks for any help.