Quote:
Originally Posted by schumicat
I may have an 84+ shifter housing (the Seine instructions say an opening in the housing had to be enlarged for 84+ models and I had to enlarge it even though I have an 82). I have no idea if it uses the same bolts. My bolts were allen head (I think 2 smaller ones for bracket were 4mm and 3 larger ones were 5mm).
|
The opening on the side of the shift housing is required when upgrading to to one of the factory short shifters. The shift lever pivot points are higher on these versions and allowance must be made for our longer pivot pin to exit the housing. The shift housing mounting bolts remain the same; M8 (3) and M6 (2).
BTW, the Weltmeister short shift kit uses an approximate 1/2" (~12mm) thick spacer under the shift housing which requires slightly longer bolts all around (usually supplied in the WM kit).
Sherwood
Seine Systems