[zap26]

I have a few novice questions that are prob simple but many have told me that the 911/01 is different so I wanna make sure Im doing this install right.
The first is about the throw out bearing. On one end of the puck like shape there are two ears directly across from eachother. Are these suppose to be inbetween the clutch fork and trans, or facing out on the clutch fork.
As well the trans is currently on a stand, the fork moves freely but should there be any resistance at all or spring loaded to reset itself automatically. I think I am thinking this because of the push action rather then the pull so I am probably just making it up in my head.
The last question I had was something someone told me but they could be off the mark. I had been informed that the t/o bearing on this particular transmission was to be connected to the pressure plate. I am using a sachs pressure plate and clutch plate. The pressure plate uses a diaphram so if that information is accurate well then I am not sure how to make this connection. It is my understanding that the diaphram on the pressure plate will create the pressure and no fixxed connection is required. Thank you for your time and any help is greatly appreciated.
Zak