|
Registered
Join Date: May 2002
Location: Chews Landing, New Jersey
Posts: 272
|
If you are working alone, then a buzzer or a meter with an audible tone makes the job a lot easier.
take out fuse
put meter on audible resistive scale, place one lead on side of fuse to the lights, (not the 12v side) the othe lead to ground you will hear the tone. Pull the bulbs one at a time, if the tone dissapears that was your problem.
If the tone is still there GENTLY move the wiring around the lights,listening for an interuption in the tone.
The object is to get the tone to dissapear.
Once you start it will become easy.
Jeff
911T
|