[redranger]

I installed that kit on my car. If lowering is your objective, you will be disappointed. If better handling is the objective, you will be happier. You will also need to add tender springs and the couplers for this kit or your springs will come loose.

You can lower the car in the front, pretty far, but the rear is the issue, it can only go down as much as the eccentric bolt will allow, which isn't much, maybe 1/2". After my install, I was at about 27" in the rear and after adjusting the bolt, it came down to 26.5", which is stock. To go lower, you need to re-inded or remove torsion bars. In the front, I could go down below 25" if I wanted to.