|
Just from curiosity, how much gap do you have from the rubber thing straddling the air plate, and the bolt head - never could work that out.
I have a KN filter - it is notched in the rubber base. You want the pin free - otherwise you may jam it down when installing the filter. Very bad.
Alan
__________________
83 SC, 82 930 (track) - Stock except for RarlyL8 race headers, RarlyL8 Zork, K27-7006, 22/28 T bars, 007 Fuel head, short 3&4 gears, NGK AFR, Greddy EBC (on the slippery slope), Wevo engine mounts, ERP rear camber adjust and mono balls, Tarret front monoball camber adjust, Elgin cams, 38mm ported heads, 964 IC. 380rwhp @ 0.8bar Apart from above, bone stock:-)
|